UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

[X] ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d)

OF THE SECURITIES ACT OF 1934

For the fiscal year ended September 30, 2017

OR

[  ] TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d)

OF THE SECURITIES ACT OF 1934

Commission File Number 001-37464

CEMTREX, INC.

(Exact name of registrant as specified in its charter)

Registrant telephone number, including area code: 631-756-9116

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes [  ] No [X]

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act. Yes [  ] No [X]

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes [X] No [  ]

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes [X] No [  ]

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. Yes [X] No [  ]

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes [  ] No [X]

As of March 31, 2017, the number of the registrant’s common stock held by non-affiliates of the registrant was 5,246,242 and the aggregate market value $18,519,234 based on the average bid and asked price of $3.53 on March 31, 2017.

As of December 5, 2017, the registrant had 10,553,522 shares of common stock outstanding.

Documents Incorporated By Reference

Information required by Part III of this Annual Report on Form 10-K is incorporated by reference to portions of our definitive proxy statement for our 2017 annual meeting of stockholders which we will file with the Securities and Exchange Commission.

Table of Contents

CEMTREX, INC. AND SUBSIDIARIES

INDEX

FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K includes “forward-looking statements” within the meaning of the Securities Act of 1933 (the “Securities Act”) and the Securities Exchange Act of 1934 (the “Exchange Act”). Any statements contained in this Annual Report on Form 10-K, other than statements of historical fact, including statements about management’s beliefs and expectations, are forward-looking statements and should be evaluated as such. These statements are made on the basis of management’s views and assumptions regarding future events and business performance. These Forward-looking statements include, but are not limited to, statements that express our intentions, beliefs, expectations, strategies, predictions or any other statements relating to our future activities or other future events or conditions. These statements are based on current expectations, estimates and projections about our business based, in part, on assumptions made by management. These statements are not guarantees of future performance and involve risks, uncertainties and assumptions that are difficult to predict. Therefore, actual outcomes and results may, and are likely to, differ materially from what is expressed or forecasted in the forward-looking statements due to numerous factors, including those described above and those risks discussed from time to time in this report, including the risks described under “Risk Factors” and any risks described in any other filings we make with the SEC. Any forward-looking statements speak only as of the date on which they are made, and we do not undertake any obligation to update any forward-looking statement to reflect events or circumstances after the date of this report.

Management’s discussion and analysis of financial condition and results of operations are based upon our financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States. The preparation of these financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses. On an on-going basis, we evaluate these estimates, including those related to useful lives of real estate assets, cost reimbursement income, bad debts, impairment, net lease intangibles, contingencies and litigation. We base our estimates on historical experience and on various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. There can be no assurance that actual results will not differ from those estimates.

Part I.

Item 1. BUSINESS

The Company was incorporated in 1998, in the state of Delaware and has evolved through strategic acquisitions and internal growth from a small emissions monitoring instruments company into a diversified global technology leader that provides innovative solutions to meet today’s industrial and manufacturing challenges. The Company offers manufacturing services of advanced electronic system assemblies, provides broad-based industrial services, and provides industrial air filtration & environmental control equipment and systems globally. Unless the context requires otherwise, all references to “we”, “our”, “us”, “Company”, “registrant”, “Cemtrex” or “management” refer to Cemtrex, Inc. and its subsidiaries.

Electronics Manufacturing Services (EMS)

Cemtrex, through its Electronics Manufacturing Services (EMS) segment, provides end to end electronic manufacturing services, which includes product design and sustaining engineering services, printed circuit board assembly and production, cabling and wire harnessing, systems integration, comprehensive testing services and completely assembled electronic products.

Cemtrex’s EMS segment works with industry leading OEMs in their outsourcing of non-core manufacturing services by forming a long-term relationship as an electronics manufacturing partner. We work in close relationships with our customers throughout the entire electronic lifecycle of a product, from design, manufacturing, and distribution. We seek to grow our business through the addition of new, high quality customers, the expansion of our share of business with existing customers, and participating in the growth of existing customers.

Using our manufacturing capabilities, we provide our customers with advanced product assembly and system level integration combined with test services to meet the highest standards of quality. Through our agile manufacturing environment, we can deliver low and medium volume and mix services to our clients. Additionally, we design, develop, and manufacture various interconnects and cable assemblies that often are sold in conjunction with our PCBAs to enhance our value to our customers. The Company also provides engineering services from new product introductions and prototyping, related testing equipment, to product redesigns.

We believe our ability to attract and retain new customers comes from our ongoing commitment to understanding our customers’ business performance requirements and our expertise in meeting or exceeding these requirements and enhancing their competitive edge. We work closely with our customers from an operational and senior executive level to achieve a deep understanding of our customer’s goals, challenges, strategies, operations, and products to ultimately build a long lasting successful relationship.

In July 2017, the Company set up a subsidiary named Cemtrex Advanced Technologies Inc. to leverage its existing design and engineering experience by directly developing and manufacturing its own proprietary advanced electronic products and for third parties for IoT applications. The Company plans to pursue collaborative partnerships with OEMs that are looking to incorporate intelligence and connectivity into their everyday products such as: furniture, consumer wearables, industrial safety wearables, and other enterprise and consumer devices. Cemtrex will look to focus on developing systems, hardware and software solutions for consumer, business and industrial applications.

Industrial Products & Services (IPS)

Cemtrex, through its Industrial Products and Services segment, offers single-source services for in plant equipment erection, relocation, and maintenance. The segment also sells a complete line of air filtration and environmental control products to a wide variety of industrial customers worldwide. The Company, under the Griffin Filters brand, provides a complete line of air filtration and environmental control equipment to industries such as: chemical, cement, steel, food, construction, mining, & petrochemical worldwide. This equipment is used to: (i) remove dust, corrosive fumes, mists, submicron particles and particulate from industrial exhausts and boilers; (ii) clean acid gases such as sulfur dioxide, hydrogen chloride, and organics from industrial exhaust stacks prior to discharging to the atmosphere; and (iii) control emissions of coal, dust, sawdust, phosphates, fly ash, cement, carbon black, soda ash, silica, and similar substances from construction facilities, mining operations and dryer exhausts.

The Company through its Advanced Industrial Services (“AIS”) brand offers one-source expertise and services for rigging, millwrighting, in plant maintenance, equipment erection, relocation, and disassembly to diversified customers in USA. We install high precision equipment in a wide variety of industrial markets like automotive, printing & graphics, industrial automation, packaging, and chemicals among others. We are a leading provider of reliability-driven maintenance and contracting solutions for the machinery, packaging, printing, chemical, and other manufacturing markets. The focus is on customers seeking to achieve greater asset utilization and reliability to cut costs and increase production from existing assets, including small projects, sustaining capital, turnarounds, maintenance, specialty welding services, and high-quality scaffolding.

Acquisitions

On December 15, 2015, the Company acquired Advanced Industrial Services Inc. and its affiliate subsidiary company based in York, Pennsylvania for a purchase price of approximately $7,500,000, and acquisition related expenses of $476,340. The purchase price consisted of $5,000,000 in cash, $1,500,000 in a seller’s note, and $1,000,000 in the form of 315,458 shares of Cemtrex restricted Common Stock. AIS averaged approximately $23 million in annual revenue and $2.4 million in annual normalized EBITDA over the two calendar years 2013 and 2014. We worked with a local bank to finance the $5.25 million self-amortizing, seven (7) year term loan and $3.5 million working capital credit line for the transaction. The loans carry annual interest rates of 30 day LIBOR plus 2.25 and 2.0 respectively. The seller’s note is for 3 years at 6% (see NOTE 13).

On May 31, 2016, the Company acquired a machinery & equipment business, an electronics manufacturing business and a logistics business from a German company, Periscope, GmbH (“Periscope”) and placed them in three newly formed entities: ROB Cemtrex Assets UG, ROB Cemtrex Automotive GmbH and ROB Cemtrex Logistics GmbH respectively. Periscope’s electronic manufacturing business deals primarily with the major German automotive manufacturers, including Tier 1 suppliers in the industry, as well as for industries like telecommunications, industrial goods, luxury consumer products, display technology, and other industrial OEMs. Periscope had more than 35 years of industrial operating experience. The Periscope acquisition was completed through use of $4,902,670 of cash, $717,936 in a Seller note and $3,298,600 in proceeds from the issuance of a related party note.

Business Strategy

We intend to continue utilizing our resource capabilities to deliver exceptional value for our customers, shareholders, and employees. We leverage our engineering and manufacturing expertise and strong customer relationships to develop new cutting-edge technologies and advanced products that solve technological challenges faced by our customers. We thoroughly analyze new product opportunities by considering projected demand for the product or service, and expected operating costs, and then only pursue those opportunities which we believe will contribute to earnings growth in the future. In addition, our senior management team has substantial business and technical experience to enable us to pursue our business strategies.

Over the past four years we have demonstrated an ability to successfully acquire and integrate companies with complementary and synergistic technologies. We will continue to seek and execute additional strategic acquisitions and focus on expanding our products and services as well as entering into new markets. We believe that the diversity of our products & services and our ability to deliver full solutions to a variety of end markets provides us with multiple sources of stable growth and a competitive advantage relative to other players in the industry. We constantly look for opportunities to gain new customers and penetrate geographic locations and end markets or acquire new product or service opportunities through acquisitions that are operationally and financially beneficial for the Company.

SUPPLIERS

The Company is not dependent on, nor expects to become dependent on, any one or a limited number of suppliers. The Company buys parts and components to assemble and manufacture its equipment and products. The Company also utilizes sub-suppliers and third-party vendors to procure from or fabricate its components based on its design, engineering and specifications. The Company also enters into subcontracts for field installation, which the Company supervises; and the Company manages all technical, physical and commercial aspects of the performance of the Company contracts. To date, the Company has not experienced difficulties either in obtaining fabricated components and other materials and parts or in obtaining qualified subcontractors for installation work. The Company seeks to have many sources of supply for each of its major requirements in order to avoid significant dependence on any one or a few suppliers. However, the supply of materials or other items could be disrupted by natural disasters or other events. Despite market price volatility for certain requirements and materials pricing pressures at some of our businesses, the raw materials and various purchased components needed for the Company’s products have generally been available in sufficient quantities.

PARTS, REPAIR AND REFURBISHMENT SERVICES

The Company also provides replacement and spare parts and repair and refurbishment services for all its systems following the expiration of the warranties which generally range up to 12 months. The Company has experienced only minimal costs from its warranties.

The Company’s standard terms of sale disclaim any liability for consequential or indirect losses or damages stemming from any failure of its products or systems or any component thereof. The Company seeks indemnification from its subcontractors for any loss, damage or claim arising from the subcontractors’ failure to perform.

COMPETITION

The Company faces substantial competition in each of its principal markets. Most of its competitors are larger and have greater financial resources than the Company; several are divisions of multi-national companies. The Company competes on the basis of price, engineering and technological expertise, know-how and the quality of its products, systems and services. Additionally, the Company’s management believes that the successful delivery, installation and performance of the Company’s products and systems is a key factor in gaining business as customers typically prefer to make significant purchases from a company with a solid performance history.

The Company obtains virtually all its contracts through competitive bidding. Although price is an important factor and may in some cases be the governing factor, it is not always determinative, and contracts are often awarded on the basis of the efficiency or reliability of products and the engineering and technical expertise of the bidder. Several companies market products that compete directly with Company’s products. Other companies offer products that potential customers may consider to be acceptable alternatives to Company’s products and services. The Company faces direct competition from companies with far greater financial, technological, manufacturing and personnel resources.

INTELLECTUAL PROPERTY

Over the years, the Company has developed proprietary technologies that give it an edge in competing with its competitors. Thus, the Company relies on a combination of trade secrets and know-how to protect its intellectual property.

MARKETING

The Company sells its products globally and relies on direct sales force, manufacturing representatives, distributors, commission sales agents, magazine advertisements, internet advertising, trade shows, trade directories and catalogue listings to market its products and services. The Company uses independent sales representatives in the United States backed by its sales management and technical professionals. The Company’s arrangements with independent sales representatives accord each a defined territory within which to sell some or all of its products and systems, provide for the payment of agreed-upon sales commissions and are terminable at will. The Company’s sales representatives do not have authority to execute contracts on the Company’s behalf.

The Company’s sales representatives also serve as ongoing liaison function between Company and its customers during the installation phase of the products and systems and address customers’ questions or concerns arising thereafter. The Company selects representatives based upon industry reputation, prior sales performance including number of prospective leads generated and sales closure rates, and the breadth of territorial coverage, among other criteria.

Technical inquiries received from potential customers are referred to the engineering personnel. Thereafter, the Company’s sales and engineering personnel jointly prepare a budget proposal, or a final bid. The period between initial customer contact and issuance of an order is generally between two and twelve months.

CUSTOMERS

The Company’s principal customers are engaged in automotive, medical, industrial automation, refining, power, chemical, packaging, printing, electronics, mining, and metallurgical processing. Historically, most of the customers have purchased individual products or systems which, in many instances, operate in conjunction with products and systems supplied by others. For several years, the Company has marketed its products as integrated custom engineered systems and solutions. No one single customer accounts for more than 10% of its annual sales.

For the IPS segment, the Company is responsible to its customers for all phases of the design, assembly, supply and, if included, field installation of its products and systems. The successful completion of a project is generally determined by a successful operational test of the supplied equipment conducted by our field service technician in the presence of the customer.

For the EMS segment, the company is responsible for the prototype design, production, supply, and delivery of products to its customers. In order to satisfy customer orders, the Company must consistently meet production deadlines and maintain a high standard of quality.

INSURANCE

The Company currently maintains different types of insurance, including general liability and property coverage. The Company also maintains product liability insurance with respect to its products and equipment. Management believes that the insurance coverage that it has is adequate for its current business needs.

EMPLOYEES

The Company employs approximately 548 full-time people as of December 5, 2017, including 36 engaged in engineering, 306 in manufacturing & field service and 206 in administrative and marketing functions.

GOVERNMENT REGULATION

The Company’s operations are subject to certain foreign, federal, state and local regulatory requirements relating to, among others, environmental, waste management, labor and health and safety matters. Management believes that the Company’s business is operated in material compliance with all such regulations.

Management believes that the existence of governmental regulations creates demand for Company’s emission monitoring equipment and environmental control systems. Significant environmental laws, particularly the Federal Clean Air Act, have been enacted in response to public concern about the environment. The Company believes that compliance with and enforcement of these laws and regulations create the demand for its environmental control related products and systems. The Federal Clean Air Act, initially adopted in 1970 and extensively amended in 1990, requires compliance with ambient air quality standards and empowers the EPA to establish and enforce limits on the emission of various pollutants from specific types of industrial facilities. States have primary responsibility for implementing these standards, and, in some cases, have adopted more stringent standards.

ITEM 1A. RISK FACTORS

Investing in our common stock involves a high degree of risk. You should consider carefully the risks and uncertainties described below, together with all of the other information in this report, including the consolidated audited financial statements and the related notes appearing at the end of this annual report on Form 10-K, with respect to any investment in shares of our common stock. If any of the following risks actually occurs, our business, financial condition, results of operations and future prospects would likely be materially and adversely affected. In that event, the market price of our common stock could decline and you could lose all or part of your investment. These statements, like all statements in this report, speak only as of the date of this report (unless another date is indicated) and we undertake no obligation to update or revise the statements in light of future development.

RISKS RELATED TO OUR BUSINESS

Our Proposed Acquisition of Key Tronic Corp. May Not Be Completed or Completed On the Terms and Conditions different from those Contemplated, or Without the Expected Benefits

We are currently pursuing a potential acquisition of Key Tronic Corp. Key Tronic has not responded positively to the Company’s previous and current proposals. If the proposed transaction were to proceed, we can make no assurance as to the completion, terms, timing, costs or benefits anticipated from any such acquisition. The acquisition would involve increases in the Company’s debt levels and outstanding shares. Unforeseen developments, including delays in obtaining various tax, regulatory and other approvals, could delay this acquisition, or cause it to occur on terms and conditions that are less favorable, or at a higher cost, than expected. In addition, the Company may encounter difficulties in integration and may not realize the degree or timing of the anticipated benefits of the acquisition. There can be no assurance that this acquisition will ever be completed.

There is no guarantee that cash flow from operations and/or debt and equity financings will provide sufficient capital to meet our expansion goals and working capital needs.

Our current strategic plan includes the expansion of our company both organically and through acquisitions if market conditions and competitive conditions allow. Due to the long-term nature of investments in acquisitions and other financial needs to support organic growth, including working capital, we expect our long-term and working capital needs to periodically exceed the short-term fluctuations in cash flow from operations. We anticipate that we will likely raise additional external capital from the sale of common stock, preferred stock and debt instruments as market conditions may allow, in addition to cash flow from operations (which may not always be sufficient), to fund our growth and working capital needs.

In the event that we need to raise significant amounts of external capital at any time or over an extended period, we face a risk that we may need to do so under adverse capital market conditions with the result that persons who acquire our common stock may incur significant and immediate dilution should we raise capital from the sale of our common or preferred stock. Similarly, we may need to meet our external capital needs from the sale of secured or unsecured debt instruments at interest rates and with such other debt covenants and conditions as the market then requires. In all of these transactions we anticipate that we will likely need to raise significant amounts of additional external capital to support our growth. However, there can be no guarantee that we will be able to raise external capital on terms that are reasonable in light of current market conditions. In the event that we are not able to do so, those who acquire our common stock may face significant and immediate dilution and other adverse consequences. Further, debt covenants contained in debt instruments that we issue may limit our financial and operating flexibility with consequent adverse impact on our common stock market price.

We are substantially dependent upon the success and continued market acceptance of our technology and a favorable regulatory environment; the absence of which may significantly reduce our sales, profits and cash flow and adversely impact our financial condition.

The failure of the emissions control regulations may adversely impact the market development as we anticipate and any lack of acceptance of our emissions control equipment technology would adversely affect our environmental control products business. In this respect, we may find that other competing technologies may be offered by other existing competitors or by those that enter the market and these competing technologies may offer a better cost-benefit ratio than our products and/or at lower prices with the result that our sales, profits, and cash flow may suffer significantly over an extended period with serious adverse impact on our financial condition.

Our Future Operating Results Depend in Part on Continued Successful Research, Development and Marketing of New and/or Improved Products and Services, through newly created subsidiary named Cemtrex Advanced technologies Inc., and There Can Be No Assurance That We Will Continue to Successfully Introduce New Products and Services into the market.

The success of new and improved products and services through Cemtrex Advanced Technologies Inc. subsidiary depends on our research & development effort and the initial acceptance of our products by the consumers. Our business is affected by varying degrees of technological change and corresponding shifts in customer demand, which result in unpredictable product transitions, shortened life cycles and increased importance of being first to market with new products and services. We may experience difficulties or delays in the research, development, production and/or marketing of new products and services which may negatively impact our operating results and prevent us from recouping or realizing a return on the investments required to continue to bring new products and services to market.

We have substantial debt which could adversely affect our ability to raise additional capital to fund operations and prevent us from meeting our obligations under outstanding indebtedness.

As of September 30, 2017, our total indebtedness was approximately $16 million, including a revolving line of credit of $4.5 million, convertible notes payable of $220,000, non-convertible notes payable of $751,853, bank loans of $6.5 million and mortgage of $4.0 million. Approximately $2.1 million of such debt is classified as current and approximately $220,000 of such debt is convertible into shares of our common stock. This substantial debt could have important consequences, including the following: (i) a substantial portion of our cash flow from operations may be dedicated to the payment of principal and interest on indebtedness, thereby reducing the funds available for operations, future business opportunities and capital expenditures; (ii) our ability to obtain additional financing for working capital, debt service requirements and general corporate purposes in the future may be limited; (iii) we may face a competitive disadvantage to lesser leveraged competitors; (iv) our debt service requirements could make it more difficult to satisfy other financial obligations; (v) The number of shares of common stock into which the existing convertible notes may be converted into might increase without an upper bound as a consequence of the fluctuating conversion rate that is 75% or 80% of the weighted average market price at the time of conversion. and (v) we may be vulnerable in a downturn in general economic conditions or in our business and we may be unable to carry out activities that are important to our growth.

Our ability to make scheduled payments of the principal of, or to pay interest on, or to refinance indebtedness depends on and is subject to our financial and operating performance, which in turn is affected by general and regional economic, financial, competitive, business and other factors beyond management’s control. If we are unable to generate sufficient cash flow to service our debt or to fund our other liquidity needs, we will need to restructure or refinance all or a portion of our debt, which could impair our liquidity. Any refinancing of indebtedness, if available at all, could be at higher interest rates and may require us to comply with more onerous covenants that could further restrict our business operations. Despite our significant amount of indebtedness, we may be able to incur significant additional amounts of debt, which could further exacerbate the risks associated with our substantial debt.

Our ability to secure and maintain sufficient credit arrangements is key to our continued operations and there is no assurance we will be able to obtain sufficient additional equity or debt financing in the future.

There is no assurance that we will be able to retain or renew our credit agreements and other finance agreements in the future. In the event the business grows rapidly, the uncertain economic climate continues or we acquire one or more other companies, additional financing resources will likely be necessary in the current or future fiscal years. As a small company with a limited ability to attract and obtain financing, there is no assurance that we will be able to obtain sufficient additional equity or debt financing in the future on terms that are reasonable in light of current market conditions.

Our sales and gross margins depend significantly on market demand for our products, as to which there can be no assurances.

The uncertainty in the U.S. and international economic and political environment could result in a decline in demand for our products in any industry. Our gross margins are dependent upon our ability to maintain sales volumes at levels that allow us to cover our fixed costs and variable costs per unit. To the extent that one or more product lines experience a significant and protracted decline in sales volume, we may experience significant declines in our gross margins that may result in losses. Further, any adverse changes in tax rates and laws affecting our customers could result in decreases in demand of our products and thus decrease our gross margins. Any of these factors could negatively impact our business, results of operations and financial condition.

Many of our existing and future customers do not commit to firm production schedules, which may result in higher fixed costs per unit for us relative to our competitors.

Most of our customers do not commit to long-term production schedules, which makes it difficult to schedule production and achieve maximum efficiency at our manufacturing facilities and to manage inventory levels. As a result, our fixed costs per unit may be higher than our competitors who are able to achieve greater economies with longer production runs at lower costs per unit and, at the same time, achieve lower manufacturing costs as a result and as a result of better manufacturing scheduling.

Many of our existing and future customers do not commit to firm production schedules. As a result, we are unable to forecast the level of customer orders with any precision. This means that it is very difficult for us to schedule production and maximize utilization of manufacturing capacity and manage inventory levels. This may adversely impact our unit manufacturing costs so that our unit manufacturing costs may be higher than our competitors’ costs.

In these circumstances, we anticipate that we could be required to increase or decrease staffing and more closely manage other expenses in order to meet the anticipated demand of our existing and future customers. Orders from our customers are subject to cancellation and delivery schedules fluctuate as a result of changes in our customers’ demand, thereby adversely affecting our results of operations, and may result in higher inventory levels. Higher inventory levels cause us to obtain greater external financing which adversely affects our financial performance.

Our products could face serious competitive challenges, including rapid technological changes, and pricing pressure from competitors, which could adversely affect our business.

In the event that one or more of our product lines become the subject of significant pressures from our existing and future competitors, market conditions, technological change, or any combination thereof, our sales revenues and our gross margins may suffer protracted and serious declines with the result that we will likely incur protracted losses thereby. Further, the barriers to entry in several of our lines of business are not so significant that we may be facing competition from others who see significant opportunities to enter the market and undercut our prices with products that possess superior technological attributes at prices that offer our customers a better value. In this instance, we could incur protracted and significant losses and persons who acquire our common stock would suffer losses thereby.

Factors affecting the industries that utilize our customers’ products could negatively impact our customers and us.

We have no real control over these factors and to the extent that any one or more of them change dramatically, we may be facing significant financial challenges that are in excess of our abilities. These factors include:

If we are unable to develop new products, our competitors may develop and market products with better features that may reduce demand for our potential products or otherwise result in our products becoming obsolete and could materially and adversely affect our ability to sustain profitability.

There are many larger competitors who compete directly with us and who have significantly greater technological and research resources. These larger competitors have greater technological and research abilities that put us at a severe disadvantage. This may serve to severely damage our reputation and our ability to market and sell other products at price levels that would allow us to achieve and maintain profit margins and positive cash flow.

We are a small company and we face rapid technological change in many of our product markets and we may not be able to introduce any new products or any enhancements to our existing products on a timely basis, or at all. This could result in prolonged and significant losses. In addition, our introduction of any new products could adversely affect the sales of certain of our existing products if new products cannibalize sales of our existing products. If our competitors develop innovative technologies that are superior to our products or if we fail to accurately anticipate market trends and respond on a timely basis with our own innovations, we may not achieve sufficient growth in its revenues to attain profitability or if we do, we may not be able sustain profitability.

Cemtrex has grown through acquisitions and is continuously looking to fund other acquisitions; Cemtrex’s failure to raise funds may have the effect of slowing down its growth and Cemtrex’s use of funds for acquisitions subjects it to acquisition-related risks.

Cemtrex intends to make acquisitions of complementary (including competitive) businesses, products and technologies. However, any future acquisitions may result in material transaction costs, increased interest and amortization expenses related to goodwill and other intangible assets, increased depreciation expense and increased operating expenses, any of which could have an adverse effect on Cemtrex’s operating results and financial position. Acquisitions will require integration of acquired assets and management into Cemtrex’s operations to realize economies of scale and control costs. Acquisitions may involve other risks, including diversion of management attention that would otherwise be available for ongoing internal development of Cemtrex’s business and risks inherent in entering markets in which Cemtrex has no or limited prior experience. Future acquisitions may also result in potentially dilutive issuances of equity securities. In addition, consummation of acquisitions may subject Cemtrex to unanticipated business uncertainties, contingent liabilities or legal matters relating to those acquired businesses for which the sellers of the acquired businesses may not fully indemnify Cemtrex. There can be no assurance that Cemtrex’s business will grow through acquisitions, as anticipated.

We could be subject to economic, political, regulatory and other risks arising from international operations.

Operating in international markets requires significant resources and management attention and will subject us to regulatory, economic and political risks that may be different from and incremental to those in the United States. In addition to the risks that we face in the United States, our international operations may involve risks that could adversely affect our business, including:

Our failure to manage any of these risks successfully could harm our international operations and our overall business, and results of our operations.

Currency fluctuations may adversely impact our operations and reduce profits on our foreign sales or increase our costs, either of which could adversely affect our financial results.

Given that substantial portion of our revenues are outside the United States, we are subject to fluctuations in foreign currency exchange rates. Translation losses resulting from currency fluctuations may adversely affect the profits from our operations and have a negative impact on our financial results. Foreign currency fluctuations may also make our systems and products more expensive for our customers, which could have a negative impact on our sales. In addition, we purchase some foreign-made products directly from and through our subcontractors. Due to the multiple currencies involved in our business, foreign currency positions partially offset and are netted against one another to reduce exposure. We cannot assure that fluctuations in foreign currency exchange rates will not make these products more expensive to purchase. Increases in our direct or indirect cost of purchasing these products could negatively impact our financial results if we are not able to pass those increased costs on to our customers.

Even though we achieved a profit for the fiscal year ended September 30, 2017, we cannot assure you that we will remain profitable and maintain a positive cash flow or, if we are profitable and have a positive cash flow, that we can sustain operations that are profitable and have a positive cash flow in the future.

We continue to incur significant expenditures related to selling and marketing and general and administrative activities as well as capital expenditures and anticipate that our expenses may increase in the foreseeable future as we expand our business. Further, as a public company we continue to incur significant legal, accounting and other expenses that we would not incur as a private company. To maintain profitability, we will need to generate significant additional revenues with significantly improved gross margins. There can be no assurance that we will be able to maintain profitability with our existing revenues and in the future generate such additional revenues, improve our gross margins, or both of them and maintain and sustain our profitability or a positive cash flow.

We face constant changes in governmental standards by which our environmental control products are evaluated and we have no control over these standards.

We have no ability to predict the extent to which governmental standards and regulations will favor or disfavor our products, our technology, or the business strategies that we have or will implement in the future. There is a distinct risk that we may face governmental standards and regulations that seriously undercut our fundamental assumptions regarding existing trends in regulation and technology and assumptions regarding the type of technology to use. To the extent that we are not able to accurately predict these trends and effectively utilize these predictions in our business strategy, we may suffer protracted losses with the result that persons who acquire our common stock will suffer losses thereby.

We believe that, due to the constant focus on the environment and clean air standards throughout the world, a requirement in the future to adhere to new and more stringent regulations both domestically and abroad is possible as governmental agencies seek to improve standards required for certification of products intended to promote clean air. In the event our products fail to meet these ever-changing standards, some or all of our emission monitoring and environmental control products may become obsolete.

The future growth of our environmental control business depends, in part, on enforcement of existing emissions-related environmental regulations and further tightening of emission standards worldwide with regulations that allow our products to compete effectively against our competitors.

We expect that the future environmental control products business growth will likely be driven, in part, by the enforcement of existing emissions-related environmental regulations and tightening of emissions standards worldwide. If such standards do not continue to become stricter or are loosened or are not enforced by governmental authorities or if such standards require the use of technologies that we do not possess or are not able to develop, it could have a material adverse effect on our business, operating results, financial condition and long-term prospects.

We may incur substantial costs enforcing our proprietary information, defending against third-party patents, invalidating third-party patents or licensing third-party intellectual property, as a result of litigation or other proceedings relating to intellectual property rights.

We have undertaken only a limited evaluation of our intellectual property rights and we may discover that one or more of our intellectual property rights infringe upon the patents or rights of others with the result that we may incur significant losses thereby. In that event, any person who acquires our common stock may suffer losses thereby.

While we believe that our technology and procedures are likely proprietary, we cannot assure you that others have not or will not replicate our technology and procedures and achieve greater efficiencies and success at our expense.

In that event, we could suffer serious and protracted losses and negative cash flow thereby, our strategy has been to rely on our flexibility to develop custom engineered solutions for various applications and be responsive to customer needs. We cannot assure you that this strategy is or will remain effective to meet these challenges.

We may not have sufficient financial resources to defend our intellectual property rights or otherwise successfully defend against claims that we have infringed on a third party’s intellectual property and, as a result, it may adversely affect our business, financial condition and results of operations.

Even if such claims are not valid, they could subject us to significant costs. In addition, it may be necessary in the future to enforce our intellectual property rights to determine the validity and scope of the proprietary rights of others. Litigation may also be necessary to defend against claims of infringement or invalidity by others. We may not have sufficient financial resources to defend our intellectual property rights or otherwise to successfully defend the company against valid or spurious claims that we have infringed upon the intellectual property rights of others.

An adverse outcome in litigation or any similar proceedings could force us to take actions that could harm its business. These include: (i) ceasing to sell products that contain allegedly infringing property; (ii) obtaining licenses to the relevant intellectual property which we may not be able to obtain on terms that are acceptable, or at all; (iii) indemnifying certain customers or strategic partners if it is determined that we have infringed upon or misappropriated another party’s intellectual property; and (iv) redesigning products that embody allegedly infringing intellectual property. Any of these results could adversely and significantly affect our business, financial condition and results of operations. In addition, the cost of defending or asserting any intellectual property claim, both in legal fees and expenses, and the diversion of management resources, regardless of whether the claim is valid, could be significant and lead to significant and protracted losses.

We may not have sufficient funds to defend a class action suit from a customer as a result of our installed base of products.

Our products are installed at large industrial plants where products of other manufacturers and suppliers are also installed. We could be subject to a class action lawsuit from a customer as a result of loss sustained by a customer due to malfunction of another manufacturer’s product. We may not have sufficient financial resources to successfully defend such a lawsuit.

Product defects could cause us to incur significant product liability, warranty and repair and support costs and damage our reputation which would have a material adverse effect on our business.

Although we test our products, defects may be discovered in future or existing products. These defects could cause us to incur significant warranty, support and repair costs and divert the attention of research and development personnel. It could also significantly damage our reputation and relationship with distributors and customers which would adversely affect our business. In addition, such defects could result in personal injury or financial or other damages to customers who may seek damages with respect to such losses. A product liability claim against us, even if unsuccessful, would likely be time consuming and costly to defend. We carry some product liability insurance but we cannot assure you that the amount of coverage that we carry is sufficient to insulate us from these claims. In the event of any claim asserting product defects, we will be directly exposed to liability for claims in excess of our coverage limits and there is a clear risk that we and our stockholders could suffer significant and protracted losses thereby.

Three alleged securities class action complaints have been filed against the Company and certain of its executive officers that challenged various aspects of Cemtrex’s stock trading and relationships, the results of which are inherently unpredictable.

Three alleged securities class action complaints were filed against Cemtrex and certain of its executive officers in the U.S. District Court for the Eastern District of New York on February 24, 2017. Under the requirements of the Private Securities Litigation Reform Act of 1995, these three alleged class actions, as well as any further related actions, will be consolidated into a single lawsuit following decisions on motions to consolidate filed with the Court on April 25, 2017. A follow-on, related derivative complaint was also filed against Cemtrex and its executive officers and directors in New York State court on April 10, 2017. That derivative action has been stayed by agreement of the parties until after the motion to dismiss process in the consolidated alleged class actions has run its course. The allegations in all four complaints are based on the assertions contained in a blog post published on an internet website that challenged various aspects of Cemtrex’s stock trading and relationships, including with its outside auditor. Cemtrex denies these assertions, and filed a lawsuit seeking damages in the amount of $170 million, against the blogger on March 4, 2017 in the U.S. District Court for the Eastern District of New York. Cemtrex voluntarily dismissed that lawsuit on June 12, 2017, because it was unable to serve the defendant blogger within the required time, but Cemtrex has reserved the right to re-file its claims against him at a later date. Cemtrex’s outside auditor, Bharat Parikh & Associates, also denied the allegations concerning it, in a letter addressed to Cemtrex’s Audit Committee and Board of Directors just a few days after the blog post was published. A copy of that letter is attached to this report as Exhibit 99.1.

Cemtrex believes the alleged class action and derivative litigations are without merit and intends to defend itself vigorously. Cemtrex intends to seek dismissal of the litigations at the earliest possible stage. Regardless of the merit of the claims, litigation is inherently unpredictable and may be costly, time consuming and disruptive to Cemtrex’s business. Cemtrex could incur judgments or enter into settlements of claims that could adversely affect its business, operating results or cash flows. Although, the Company does have insurance, the insurance may not be sufficient and Cemtrex could also be subject to costly indemnification of its executive officers, which may not be covered by insurance.

The markets in which we operate are highly competitive, and many of our competitors have significantly greater financial and managerial resources than we do.

There is significant competition among companies that provide emissions monitoring and environmental control systems. Several companies market products that compete directly with our products. Other companies offer products that potential customers may consider to be acceptable alternatives to our products and services. We face direct competition from companies with far greater financial, technological, manufacturing and personnel resources.

Our results may fluctuate due to certain regulatory, marketing and competitive factors over which we have little or no control.

The factors listed below, some of which we cannot control, may cause our revenue and results of operations to fluctuate significantly:

Increased internet information security threats and targeted computer crimes could pose a risk to our systems, networks, and operations.

Increased global internet information security threats and targeted computer crimes pose a risk to the security of our systems, information and networks and the confidentiality, availability and integrity of our data and communications. While we attempt to mitigate these risks by employing a number of measures, including comprehensive monitoring of our networks and maintenance of backup and protective systems, still our systems, networks and products could remain potentially vulnerable to advanced persistent threats. Depending on their nature, such threats could potentially lead to the compromising of our information and communications, improper use of our systems and networks, manipulation and destruction of data, defective products, production downtimes and operational disruptions, which in turn could adversely affect our reputation, competitiveness and results of operations.

The loss of the services of Aron Govil and Saagar Govil for any reason would materially and adversely affect our business operations and prospects.

Our financial success is dependent to a significant degree upon the efforts of Aron Govil, our Executive Director, and Saagar Govil, our President and Chief Executive Officer. Aron Govil, who previously served as our Chairman of the Board, has knowledge regarding environmental control systems and has financial resources and business contacts that would be extremely difficult to replace. Saagar Govil possesses engineering, sales and marketing experience concerning our company that our other officers do not have. We have not entered into employment arrangements with them. There can be no assurance that Aron Govil and Saagar Govil will continue to provide services to us. While Saagar Govil devotes all of his working time to our company, Aron Govil devotes an average of 20 hours per week to our company and the balance of his working time is devoted to other business and investment activities. A voluntary or involuntary departure by Aron Govil and/or Saagar Govil could have a materially adverse effect on our business operations if we were not able to attract a qualified replacement for them in a timely manner.

We have a small management team. The loss of any member of our senior management and any significant failure to attract and retain qualified personnel in a competitive labor market could limit our ability to execute our growth strategy, resulting in a slower rate of growth or a period of losses and/or negative cash flow.

We depend on the continued service of our senior management. Due to the nature of our business, we may have difficulty locating and hiring qualified personnel and retaining such personnel once hired. The loss of the services of any of our key personnel, or our failure to attract and retain other qualified and experienced personnel on acceptable terms, could limit our ability to execute our growth strategy resulting in a slower rate of growth.

We are an “emerging growth company” and our election to delay adoption of new or revised accounting standards applicable to public companies may result in our consolidated financial statements not being comparable to those of some other public companies. As a result of this and other reduced disclosure requirements applicable to emerging growth companies, our securities may be less attractive to investors.

As a company with less than $1.0 billion in revenue during our last completed fiscal year, we qualify as an “emerging growth company” under the JOBS Act. An emerging growth company may take advantage of specified reduced reporting requirements that are otherwise generally applicable to public companies. In particular, as an emerging growth company we:

We intend to take advantage of all of these reduced reporting requirements and exemptions, including the longer phase-in periods for the adoption of new or revised financial accounting standards under §107 of the JOBS Act. Our election to use the phase-in periods may make it difficult to compare our consolidated financial statements to those of non-emerging growth companies and other emerging growth companies that have opted out of the phase-in periods under §107 of the JOBS Act.

Certain of these reduced reporting requirements and exemptions were already available to us due to the fact that we also qualify as a “smaller reporting company” under SEC rules. For instance, smaller reporting companies are not required to obtain an auditor attestation and report regarding management’s assessment of internal control over financial reporting, are not required to provide a compensation discussion and analysis, are not required to provide a pay-for-performance graph or CEO pay ratio disclosure, and may present only two years of audited financial statements and related Management’s Discussion and Analysis of Financial Condition and Results of Operations disclosure.

Under the JOBS Act, we may take advantage of the above-described reduced reporting requirements and exemptions for up to five years after our initial sale of common equity pursuant to a registration statement declared effective under the Securities Act, or such earlier time that we no longer meet the definition of an emerging growth company. In this regard, the JOBS Act provides that we would cease to be an “emerging growth company” if we have more than $1.0 billion in annual revenues, have more than $700 million in market value of our common stock held by non-affiliates, or issue more than $1.0 billion in principal amount of non-convertible debt over a three-year period. Under current SEC rules, however, we will continue to qualify as a “smaller reporting company” for so long as we have a public float (i.e., the market value of common equity held by non-affiliates) of less than $75 million as of the last business day of our most recently completed second fiscal quarter.

We cannot predict if investors will find our securities less attractive due to our reliance on these exemptions. If investors were to find our securities less attractive as a result of our election, we may have difficulty raising all of the proceeds we seek in this offering.

Sales of substantial amounts of our common stock in the public market could depress the market price of our common stock.

Our common stock is traded on the Nasdaq Capital Market. If our stockholders sell substantial amounts of our common stock in the public market, including the shares of common stock issuable upon the exercise of the Series 1 Warrants, shares issued in acquisitions, and shares issuable upon the exercise of outstanding stock options, or the market perceives that such sales may occur, the market price of our common stock could fall and we may be unable to sell our common stock in the future.

Our common stock may experience extreme price and volume fluctuations, which could lead to costly litigation for us and make an investment in us less appealing.

The market prices of the securities of early-stage companies, particularly companies like ours without consistent product revenues and earnings, have been highly volatile and are likely to remain highly volatile in the future. This volatility has often been unrelated to the operating performance of particular companies. In the past, companies that experience volatility in the market price of their securities have often faced securities class action litigation. Whether or not meritorious, litigation brought against us could result in substantial costs, divert our management’s attention and resources and harm our financial condition and results of operations.

RISKS RELATED TO INVESTMENT IN THE COMMON STOCK OF THE COMPANY

The Company’s Common Stock currently trades on the NASDAQ under the symbol “CETX”. There can be no assurance that the Company’s shares will continue to trade on NASDAQ in the future, and there can be no assurance that an active trading market will develop or be sustained. The market price of the shares of Common Stock is likely to be highly volatile and may be significantly affected by factors such as actual or anticipated fluctuations in the Company’s operating results, announcements of technological innovations, new products or new contracts by the Company or its competitors, developments with respect to proprietary rights, adoption of new government regulations affecting the environment, general market conditions and other factors. In addition, the stock market has from time to time experienced significant price and volume fluctuations that have particularly affected the market price for the common stocks of technology companies. These types of broad market fluctuations may adversely affect the market price of the Company’s common stock.

Our common stock has from time to time been “thinly-traded.”

The number of persons interested in purchasing our common stock at or near ask prices at any given time may be relatively small or non-existent. Therefore, stockholders may be unable to sell at or near ask prices or at all if they need to sell shares to raise money or otherwise desire to liquidate their shares. Our “thinly-traded” stock is attributable to a number of factors, including the fact that we are a small company that is relatively unknown to stock analysts, stock brokers, institutional investors and others in the investment community that generate or influence sales volume, and that even if we came to the attention of such persons, they tend to be risk-averse and would be reluctant to follow an unproven company such as ours or purchase or recommend the purchase of our shares until such time as we become more seasoned and viable. As a consequence, there may be periods of several days or more when trading activity in our shares is minimal or non-existent, as compared to a seasoned issuer which has a large and steady volume of trading activity that will generally support continuous sales without an adverse effect on share price. We cannot give stockholders any assurance that a broader or more active public trading market for our common shares will develop or be sustained, or that current trading levels will be sustained.

We may not pay cash dividends.

During fiscal year 2017 the Company’s Board of Directors approved an annual dividend on the common stock of the Company. There can be no assurance that the Company will pay cash dividends on its common stock in the future. Any decision to pay cash dividends will depend upon the Company’s profitability at the time, cash available and other relevant factors.

Our principal shareholder has significant influence over our Company which could make it impossible for the public stockholders to influence the affairs of the Company.

We are a “Controlled Company” under exchange listing rules. Approximately 61% of our outstanding voting equity is beneficially held by combination of Aron Govil, the Company’s Executive Director, and Saagar Govil the Company’s CEO, as a result of this common stock ownership and the Series A preferred stock ownership by Mr. Aron Govil, the Company’s management controls and will control in the future, substantially all matters requiring approval by the stockholders of the Company, including the election of all directors and approval of significant corporate transactions. This makes it impossible for the public stockholders to influence the affairs of the Company.

ITEM 1B. UNRESOLVED STAFF COMMENTS

None.

ITEM 2. PROPERTIES

The Company has the following properties:

Our IPS segment leases (i) approx. 5,000 square feet of office and warehouse space in Liverpool, New York from a third party in a five year lease at a monthly rent of $2,200 expiring on March 31, 2018, (ii) approximately 2,000 square feet of office on a month to month rental from a third party in Hong Kong at a monthly rental of $4,133.00, (iii) approximately 25,000 square feet of warehouse space in Manchester, PA from a third party in a seven year lease at a monthly rent of $7,300 expiring on December 13, 2020, (iv) approximately 43,000 square feet of office and warehouse space in York, PA from a third party in a ten year lease at a monthly rent of $22,625 expiring on March 23, 2026, (v) approximately 15,500 square feet of warehouse space in Emigsville, PA from a third party in a one year lease at a monthly rent of $4,337 expiring on August 31, 2018, and (vi) the Company leases its principal office at Farmingdale, New York, 6,000 square feet of office and warehouse/shop space on a month to month lease in a building owned by Aron Govil, Executive Director of the Company, at a monthly rental of $4,000.

Our EMS segment owns a 70,000 square foot manufacturing building in Neulingen, Germany. The EMS segment also leases (i) a 10,000 square foot manufacturing facility in Sibiu, Romania from a third party in a ten year lease at a monthly rent of €8,000 expiring on May 31, 2019, (ii) approximately 100,000 square feet of office, warehouse and manufacturing space in Paderborn, Germany at monthly rental of €55,400 which expires on December 31, 2017, (iii) approximately 50,000 square feet of office, warehouse space in Paderborn, Germany at a monthly rental of €22,633 which expires on December 31, 2017.

ITEM 3. LEGAL PROCEEDINGS

Three alleged securities class action complaints have been filed against Cemtrex and certain of its executive officers that challenged various aspects of Cemtrex’s stock trading and relationships, the results of which are inherently unpredictable. These three alleged securities class action complaints were filed against Cemtrex and certain of its executive officers in the U.S. District Court for the Eastern District of New York on February 24, 2017. Under the requirements of the Private Securities Litigation Reform Act of 1995, these three alleged class actions, as well as any further related actions, will be consolidated into a single lawsuit following decisions on motions to consolidate filed with the Court on April 25, 2017. A follow-on, related derivative complaint was also filed against Cemtrex and its executive officers and directors in New York State court on April 10, 2017. That derivative action has been stayed by agreement of the parties until after the motion to dismiss process in the consolidated alleged class actions has run its course. The allegations in all four complaints are based on the assertions contained in a blog post published on an internet website that challenged various aspects of Cemtrex’s stock trading and relationships, including with its outside auditor. Cemtrex denies these assertions, and filed a lawsuit seeking damages in the amount of $170 million, against the blogger on March 4, 2017 in the U.S. District Court for the Eastern District of New York. Cemtrex voluntarily dismissed that lawsuit on June 12, 2017, because it was unable to serve the defendant blogger within the required time, but Cemtrex has reserved the right to re-file its claims against him at a later date. Cemtrex’s outside auditor, Bharat Parikh & Associates, also denied the allegations concerning it, in a letter addressed to Cemtrex’s Audit Committee and Board of Directors just a few days after the blog post was published. A copy of that letter is attached to this report as Exhibit 99.1.

Cemtrex believes the alleged class action and derivative litigations are without merit and intends to defend itself vigorously. Cemtrex intends to seek dismissal of the litigations at the earliest possible stage. Regardless of the merit of the claims, litigation is inherently unpredictable and may be costly, time consuming and disruptive to Cemtrex’s business. Cemtrex could incur judgments or enter into settlements of claims that could adversely affect its business, operating results or cash flows. Although, the Company does have insurance, however the insurance may not be sufficient and Cemtrex could also be subject to costly indemnification of its executive officers, which may not be covered by insurance.

ITEM 4. MINE SAFETY DISCLOSURES

Not applicable.

PART II

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED SHAREHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

The Company’s Common Stock currently trades on the NASDAQ Capital Markets under the symbol “CETX”.

As of December 5, 2017, there were approximately 4,400 holders of record of the Company’s common stock as determined from the Company’s transfer agent’s list. Such list also includes beneficial owners of securities whose shares are held in the names of various dealers and clearing agencies.

The Company is authorized to issue 20,000,000 shares of common stock, $0.001 par value per share. On December 5, 2017, there were 10,553,522 shares of common stock issued and outstanding and 1,000,000 shares of Series A preferred stock issued or outstanding.

In April 2015, the Company effected a 1-for-6 reverse stock split of its outstanding common stock.

On June 25, 2015, the Company’s common stock commenced trading on the NASDAQ Capital Markets under the symbol “CETX”. Prior to June 25, 2015 the Company’s Common Stock traded on the over-the-counter bulletin board trading system. The price ranges presented below represent the highest and lowest quoted bid prices during the calendar quarters for 2015, 2016 and 2017 reported by the exchange and converted based on the one-for-six reverse stock split. The quotes represent prices between dealers and do not reflect mark-ups, markdowns or commissions and therefore may not necessarily represent actual transactions.

As reported by NASDAQ Capital Markets, on December 5, 2017 the closing sales price of the Company’s Common Stock was $2.60 per share.

Dividend Policy

On April 19, 2017, the Company’s Board of Directors approved an annual dividend on the common stock of the Company. There can be no assurance that the Company will pay cash dividends on its common stock in the future. Any decision to pay cash dividends will depend upon the Company’s profitability at the time, cash available and other relevant factors.

ITEM 6. SELECTED FINANCIAL DATA

Not required for Smaller Reporting Companies

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

Except for historical information contained in this report, the matters discussed are forward-looking statements that involve risks and uncertainties. When used in this report, words such as “anticipates”, “believes”, “could”, “estimates”, “expects”, “may”, “plans”, “potential” and “intends” and similar expressions, as they relate to the Company or its management, identify forward-looking statements. Such forward-looking statements are based on the beliefs of the Company’s management, as well as assumptions made by and information currently available to the Company’s management. Among the factors that could cause actual results to differ materially are the following: the effect of business and economic conditions; the impact of competitive products and their pricing; unexpected manufacturing or supplier problems; the Company’s ability to maintain sufficient credit arrangements; changes in governmental standards by which our environmental control products are evaluated and the risk factors reported from time to time in the Company’s SEC reports, including its recent report on Form 10-K. The Company undertakes no obligation to update forward-looking statements as a result of future events or developments.

Overview

The Company was incorporated in 1998, in the state of Delaware and has evolved through strategic acquisitions and internal growth from a small emission monitoring Instruments Company into a diversified global technology leader that provides innovative solutions to meet today’s industrial and manufacturing challenges. The Company offers manufacturing services of advanced electronic system assemblies, provides broad-based industrial services, and provides industrial air filtration & environmental control equipment and systems globally.

Electronics Manufacturing Services (EMS)

Cemtrex, through its Electronics Manufacturing Services (EMS) segment, provides end to end electronic manufacturing services, which includes product design and sustaining engineering services, printed circuit board assembly and production, cabling and wire harnessing, systems integration, comprehensive testing services and completely assembled electronic products.

Cemtrex’s EMS segment works with industry leading OEMs in their outsourcing of non-core manufacturing services by forming a long-term relationship as an electronics manufacturing partner. We work in close relationships with our customers throughout the entire electronic lifecycle of a product, from design, manufacturing, and distribution. We seek to grow our business through the addition of new, high quality customers, the expansion of our share of business with existing customers, and participating in the growth of existing customers.

Using our manufacturing capabilities, we provide our customers with advanced product assembly and system level integration combined with test services to meet the highest standards of quality. Through our agile manufacturing environment, we can deliver low and medium volume and mix services to our clients. Additionally, we design, develop, and manufacture various interconnects and cable assemblies that often are sold in conjunction with our PCBAs to enhance our value to our customers. The Company also provides engineering services from new product introductions and prototyping, related testing equipment, to product redesigns.

We believe our ability to attract and retain new customers comes from our ongoing commitment to understanding our customers’ business performance requirements and our expertise in meeting or exceeding these requirements and enhancing their competitive edge. We work closely with our customers from an operational and senior executive level to achieve a deep understanding of our customer’s goals, challenges, strategies, operations, and products to ultimately build a long lasting successful relationship.

In July 2017, the Company set up a subsidiary named Cemtrex Advanced Technologies Inc. to leverage its existing design and engineering experience by directly developing and manufacturing its own proprietary advanced electronic products for third parties for IoT applications. The Company plans to pursue collaborative partnerships with OEMs that are looking to incorporate intelligence and connectivity into their everyday products such as: furniture, consumer wearables, industrial safety wearables, and other enterprise and consumer devices. Cemtrex will look to focus on developing systems, hardware solutions for both consumer and industry applications, and software applications.

Industrial Products & Services (IPS)

Cemtrex, through its Industrial Products and Services segment, offers single-source services for in plant equipment erection, relocation, and maintenance. The segment also sells a complete line of air filtration and environmental control products to a wide variety of industrial customers worldwide. The Company, under the Griffin Filters brand, provides a complete line of air filtration and environmental control equipment to industries such as: chemical, cement, steel, food, construction, mining, & petrochemical worldwide. This equipment is used to: (i) remove dust, corrosive fumes, mists, submicron particles and particulate from industrial exhausts and boilers; (ii) clean acid gases such as sulfur dioxide, hydrogen chloride, and organics from industrial exhaust stacks prior to discharging to the atmosphere; and (iii) control emissions of coal, dust, sawdust, phosphates, fly ash, cement, carbon black, soda ash, silica, and similar substances from construction facilities, mining operations and dryer exhausts.

The Company through its Advanced Industrial Services (“AIS”) brand offers one-source expertise and services for rigging, millwrighting, in plant maintenance, equipment erection, relocation, and disassembly to diversified customers in USA. We install high precision equipment in a wide variety of industrial markets like automotive, printing & graphics, industrial automation, packaging, and chemicals among others. We are a leading provider of reliability-driven maintenance and contracting solutions for the machinery, packaging, printing, chemical, and other manufacturing markets. The focus is on customers seeking to achieve greater asset utilization and reliability to cut costs and increase production from existing assets, including small projects, sustaining capital, turnarounds, maintenance, specialty welding services, and high-quality scaffolding.

CRITICAL ACCOUNTING POLICIES AND ESTIMATES

The following discussion and analysis is based upon our consolidated financial statements which have been prepared in accordance with accounting principles generally accepted in the United States of America. The preparation of our financial statements requires management to make estimates and assumptions that affect the reported amounts of revenues and expenses, and assets and liabilities during the periods reported. Estimates are used when accounting for certain items such as revenues, allowances for returns, early payment discounts, customer discounts, doubtful accounts, employee compensation programs, depreciation and amortization periods, taxes, inventory values, and valuations of investments, goodwill, other intangible assets and long-lived assets. We base our estimates on historical experience, where applicable and other assumptions that we believe are reasonable under the circumstances. Actual results may differ from our estimates under different assumptions or conditions. We believe that the following critical accounting policies affect our more significant judgments and estimates used in preparation of our consolidated financial statements.

We maintain allowances for doubtful accounts for estimated losses resulting from the inability of our customers to make required payments. We base our estimates on the aging of our accounts receivable balances and our historical write-off experience, net of recoveries.

We value our inventories at the lower of cost or market. We write down inventory balances for estimated obsolescence or unmarketable inventory equal to the difference between the cost of the inventory and the estimated market value based upon assumptions about future demand and market conditions.

Goodwill is reviewed for possible impairment at least annually or more frequently upon the occurrence of an event or when circumstances indicate that the Company’s carrying amount is greater than the fair value. In accordance with SFAS 142, the Company examined goodwill for impairment and determined that the Company’s carrying amount did not exceed the fair value, thus, there was no impairment.

Generally, sales are recognized when shipments are made to customers. Rebates, allowances for damaged goods and other advertising and marketing program rebates are accrued pursuant to contractual provisions and included in accrued expenses. Certain amount of our revenues fall under the percentage-of-completion method of accounting used for long-term contracts. Under this method, sales and gross profit are recognized as work is performed based on the relationship between actual costs incurred and total estimated costs at completion. Sales and gross profit are adjusted prospectively for revisions in estimated total contract costs and contract values. Estimated losses are recorded when identified.

In countries in which the Company operates, and the functional currency is other than the U.S. dollar, assets and liabilities are translated using published exchange rates in effect at the consolidated balance sheet date. Revenues and expenses and cash flows are translated using an approximate weighted average exchange rate for the period. Resulting translation adjustments are recorded as a component of accumulated other comprehensive income on the accompanying consolidated balance sheet.

Results of Operations - For the fiscal years ending September 30, 2017 and 2016

Total revenue for the years ended September 30, 2017 and 2016 was $120,628,200 and $93,704,560, respectively, an increase of $26,923,640, or 29%. Net income for years ended September 30, 2017 and 2016 was $4,389,915 and $4,994,045, respectively, a decrease of $604,130, or 12%. Revenues, as compared to the previous period, were higher due to the acquisition of AIS and Periscope as well as increased sales in our existing businesses. Net income in this period as compared to the previous period was lower due to increased research and development costs, acquisition costs as well as higher sales and marketing expenses.

Revenues

Our IPS segment’s revenues for the year ended September 30, 2017 increased by $7,325,255 or 15%, to $56,569,266 from $49,244,011for the year ended September 30, 2016. The increase was mainly attributed to increased sales and to some extent, the acquisition of AIS.

Our EMS segment’s revenues for the year ended September 30, 2017 increased by $19,598,385 or 44% to $64,058,934 from $44,460,549 for the year ended September 30, 2016. The increase was mainly attributed to the acquisition of Periscope and to a lesser extent increased sales within the segment.

Gross Profit

Gross Profit for the year ended September 30, 2017 was $39,913,552 or 33% of revenues as compared to gross profit of $29,213,670 or 31% of revenues for the year ended September 30, 2016. The increase in gross profit percentage in the year ended September 30, 2017, as compared to the prior year, was a direct result of projects with higher profit margins.

Operating Expenses

Operating expenses for the year ended September 30, 2017 increased $10,648,102 or 44% to $34,797,874 from $24,149,772 for the year ended September 30, 2016. Operating expenses as a percentage of revenue increased in the year ended September 30, 2017 to 29% from 26% in the year ended September 30, 2016. The increases in operating expenses in both dollars and as a percentage of revenue are the result of increased research and development costs, increased sales and marketing expenses, increased acquisition costs as well as due to acquisition of Periscope.

Other Income

Other income for the fiscal year of 2017 was $313,817 as compared to $1,693,931 for the fiscal year of 2016. The decrease was due to one-time other income generated in fiscal year 2016.

Interest Expense

Interest expense for the fiscal year of 2017 was $923,952 as compared to $673,612 for the fiscal year of 2016. The increase in interest expense was attributed to higher balances on our revolving lines of credit and interest paid on our convertible notes.

Provision for Income Taxes

During the fiscal year of 2017 we recorded an income tax provision of $115,648 compared to $1,090,173 for the fiscal year of 2016. The provision for income tax is based upon the projected income tax from the Company’s various domestic and international subsidiaries that are subject to income taxes.

Net Income

The Company had net income of $4,389,915 or 4% of revenues, for the year ended September 30, 2017 as compared to a net income of $4,994,045 or 5% of revenues, for the year ended September 30, 2016. Net income in this period as compared to the previous period was lower due to increased research and development costs, acquisition costs as well as higher sales and marketing expenses.

Effects of Inflation

The Company’s business and operations have not been materially affected by inflation during the periods for which financial information is presented.

Liquidity and Capital Resources

Working capital was $26,366,437 at September 30, 2017 compared to $11,771,946 at September 30, 2016. This includes cash and cash equivalents of $10,442,857 at September 30, 2017 and $6,045,521 at September 30, 2016, respectively. The increase in working capital was primarily due to the cash received in the Company’s subscription rights offering.

Accounts receivable increased by $1,892,412 or 14% to $15,461,139 at September 30, 2017 from $13,568,727 at September 30, 2016. The increase in accounts receivable is attributed to increased sales.

Inventories increased by $3,200,255 or 23% to $17,271,882 at September 30, 2017 from $14,071,627 at September 30, 2016. The increase in inventory is attributed to the need for additional inventories for upcoming projects and product lines due to increased sales demand from customers.

Operating activities provided $1,107,727 for the year ended September 30, 2017 compared to providing $7,895,211 of cash for the year ended September 30, 2016. The decrease in operating cash flows in fiscal 2017 was mainly due to the increases in inventory and accounts receivable.

Investment activities used $6,956,627 of cash during the year ended September 30, 2017 compared to using $17,146,716 during the year ended September 30, 2016. In fiscal 2017 our investment activities were mainly comprised of investment in equipment and the purchase and retirement of shares of our common stock.

Financing activities provided $10,246,236 for the year ended September 30, 2017 as compared to providing $13,210,289 in the year ended September 30, 2016. In fiscal 2017 our financing activities were mainly comprised of the proceeds from our subscription rights offering offset by payments on our long-term debt and cash dividends.

We believe that our cash on hand, cash generated by operations, is sufficient to meet the capital demands of our current operations during the 2018 fiscal year (ending September 30, 2018). Any major increases in sales, particularly in new products, may require substantial capital investment. Failure to obtain sufficient capital could materially adversely impact our growth potential.

In December 2016, we commenced a subscription rights offering to our stockholders to raise up to $15.0 million through the sale of units, each consisting of one share of our series 1 preferred stock, paying cumulative dividends at the rate of 10% of the purchase price per year, and two five-year series 1 warrants, upon the exercise of subscription rights at $10.00 per unit. On February 2, 2017, the Company completed the final closing of its rights offering. With the final closing, the total subscription proceeds received by the Company in its rights offering and related standby placement amounted to $14,018,750, before payment of the dealer-manager fee and other offering expenses.

Overall, there is no guarantee that cash flow from our existing or future operations and any external capital that we may be able to raise will be sufficient to meet our expansion goals and working capital needs.

Outlook

We anticipate that the outlook for our products and services remains fairly strong and we are positioned well to take advantage of it.

We are a technology company with worldwide operations. Our diversity of business segments, and the breadth of our product and services portfolios, have helped mitigate the economic impact of any one particular industry sector or any single country on our consolidated operating results and we expect the same in the future. We believe growth for our products and services is driven by the increasing demand for newer technological products and overall industrial economic growth. These trends stimulate investment in new consumer and industrial products with related infrastructure, and in upgrades of existing facilities. We continue to focus on revenue growth, market expansion and increasing profitability by expanding our presence in emerging technologies. Our outlook is to continue expanding our scope of technology, products, and services horizontally through selective acquisitions and the formation of new business units by leveraging our technical and financial resources.

This Outlook section, and other portions of this document, include certain “forward-looking statements” within the meaning of that term in Section 27A of the Securities Act of 1933, and Section 21E of the Securities Exchange Act of 1934, including, among others, those statements preceded by, following or including the words “believe,” “expect,” “intend,” “anticipate” or similar expressions. These forward-looking statements are based largely on the current expectations of management and are subject to a number of assumptions, risks and uncertainties. Our actual results could differ materially from these forward-looking statements. Important factors to consider in evaluating such forward-looking statements include those discussed in Item 1A. Risk Factors as well as:

ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Not applicable.

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

The financial statements required to be included in this report appear as indexed in the appendix to this report beginning on page F-1.

ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

There have been no changes in and/or disagreements with Bharat Parikh & Associates, our independent registered public accountants, on accounting and financial disclosure matters.

ITEM 9A. CONTROLS AND PROCEDURES

Our Chief Executive Officer and Vice President of Finance (the “Certifying Officers”) are responsible for establishing and maintaining disclosure controls and procedures for the Company. The Certifying Officers have designed such disclosure controls and procedures to ensure that material information is made known to them, particularly during the period in which this Report was prepared.

Evaluation of Controls and Procedures

We maintain disclosure controls and procedures that are designed to ensure that information required to be disclosed in our Securities Exchange Act reports is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms, and that such information is accumulated and communicated to our management, including our chief executive and financial officer, to allow timely decisions regarding required disclosure. In designing and evaluating the disclosure controls and procedures, management recognized that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving the desired control objectives, as ours are designed to do, and management necessarily was required to apply its judgment in evaluating the cost- benefit relationship of possible controls and procedures.

Management’s Report on Internal Control Over Financial Reporting

The company’s management is responsible for establishing and maintaining adequate “internal control over financial reporting” (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)). Management evaluates the effectiveness of the company’s internal control over financial reporting using the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (1992 framework). Management, under the supervision and with the participation of the company’s Chief Executive Officer and Vice President of Finance, assessed the effectiveness of the company’s internal control over financial reporting as of September 30, 2017, and concluded that it is effective.

This report does not include an attestation report of the Company’s Independent Registered Public Accounting Firm regarding internal control over financial reporting. Management’s report was not subject to attestation by the Company’s Independent Registered Public Accounting Firm pursuant to temporary rules of the Securities and Exchange Commission that permit the Company to provide only Management’s report in this Annual Report.

As of September 30, 2017, an evaluation was performed under the supervision and with the participation of our management, including our Chief Executive Officer and Principal Financial and Accounting Officer, of the effectiveness of the design and operation of our disclosure controls and procedures. Based upon that evaluation, our Chief Executive Officer and Principal Financial Officer concluded that our disclosure controls and procedures were effective.

Changes in Internal Controls

There have been no changes in the Company’s internal controls over financial reporting that occurred during the Company’s last fiscal year to which this report relates that have materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting.

Limitations on the Effectiveness of Controls

A control system, no matter how well conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within a company have been detected. The Company’s disclosure controls and procedures are designed to provide reasonable assurance of achieving its objectives. The Company’s chief executive officer and principal financial and accounting officer concluded that the Company’s disclosure controls and procedures are effective at that reasonable assurance level.

ITEM 9B. OTHER INFORMATION

None.

PART III

We incorporate the information this item requires by referring to the information under the captions Proposal No. 1: Election of Directors and Corporate Governance in our proxy statement for our 2017 annual stockholders’ meeting (“2017 Proxy Statement”), which we will file with the SEC pursuant to Regulation 14A.

We incorporate the information this item requires by referring to the information under the caption Executive Compensation in our 2017 Proxy Statement, which we will file with the SEC pursuant to Regulation 14A.

We incorporate the information this item requires by referring to the information under the caption Security Ownership of Certain Beneficial Owners and Management in our 2017 Proxy Statement, which we will file with the SEC pursuant to Regulation 14A.

Securities Authorized for Issuance Under Equity Compensation Plans

The following table presents certain information as of September 30, 2017 regarding our equity compensation plans:

See more detailed information regarding our equity compensation plans in Note 15 in the Notes to Consolidated Financial Statements in this 2017 Form 10-K.

We incorporate the information this item requires by referring to the information under the captions Proposal No. 1: Election of Directors and Corporate Governance in our 2017 Proxy Statement, which we will file with the SEC pursuant to Regulation 14A.

We incorporate the information this item requires by referring to the information under the caption Proposal No. 2: Ratification of Appointment of Independent Registered Public Accounting Firm in our 2017 Proxy Statement, which we will file with the SEC pursuant to Regulation 14A.

PART IV

* Filed herewith

(1) Incorporated by reference from Form 10-12G filed on May 22, 2008.

(2) Incorporated by reference from Form 8-K filed on September 10, 2009.

(3) Incorporated by reference from Form 8-K filed on August 22, 2016.

(4) Incorporated by reference from Form 8-K filed on July 1, 2016.

(5) Incorporated by reference from Form 10-K filed on August 25, 2016.

(6) Incorporated by reference from Form 8-K/A filed on September 26, 2016.

(7) Incorporated by reference from Form 8-K/A filed on November 24, 2017.

(8) Incorporated by reference from Form 8-K/A filed on November 9, 2016.

(9) Incorporated by reference from Form 10-Q/A filed on November 10, 2016.

(10) Incorporated by reference from Form S-1 filed on August 29, 2016 and as amended on November 4, 2016, November 23, 2016, and December 7, 2016.

(11) Incorporated by reference from Form 10-K filed on December 28, 2016.

(12) Incorporated by reference from Form 8-K filed on January 24, 2017.

(13) Incorporated by reference from Form 8-K filed on February 10, 2017.

(14) Incorporated by reference from Form 10-Q filed on February 14, 2017.

(15) Incorporated by reference from Form 8-K filed on September 8, 2017.

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

Pursuant to the requirements of the Securities and Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.

Index to the Consolidated Financial Statements

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To

The Board of Directors and Shareholders of

Cemtrex Inc.

19 Engineers Lane

New York- NY

USA.

We have audited the consolidated balance sheet of Cemtrex, Inc. (the “Company”) and its subsidiaries as of September 30, 2017 and 2016 and the related consolidated statements of income, retained earnings and cash flows for the years then ended. These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits. We did not audit the financial statements of Advanced Industrial Services Inc, a wholly owned subsidiary, whose financial statements reflects total assets of $13,186,148 as of September 30, 2017 and total revenues of $21,706,436 for the year then ended. Those statements were audited by other independent auditors whose report has been furnished to us, and our opinion, in so far as it relates to the amounts included for Advanced Industrial Services Inc., is based solely on the report of the other auditors.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audit included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audit provides a reasonable basis for our opinion.

In our opinion, based on our audits and the report of other auditors, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of the Company and subsidiaries as of September 30, 2017 and 2016 and the results of their operations and their cash flows for the years then ended in conformity with accounting principles generally accepted in the United States of America.

For Bharat Parikh & Associates

Chartered Accountants

/s/ CA Bharat Parikh

CA Bharat Parikh

(Senior Managing Partner)

Registered with PCAOB

Date :- 12/13/2017

Place:- HQ Vadodara GJ,

India

CONSOLIDATED BALANCE SHEETS

The accompanying notes are an integral part of these consolidated financial statements.

CONSOLIDATED STATEMENTS OF OPERATIONS AND COMPREHENSIVE INCOME

The accompanying notes are an integral part of these consolidated financial statements.

CONSOLIDATED STATEMENTS OF SHAREHOLDERS’ EQUITY

The accompanying notes are an integral part of these consolidated financial statements.

CONSOLIDATED STATEMENTS OF CASH FLOWS